Burn-Proofing Your Camera

The Fuji GW 690iii is one awesome beast. Received from Japan for a modest $450, she is a very high quality piece. It looks plasticky, but don’t let that fool you. It feels and acts very solid. And it’s good looking too. I really like the sleek design. Some like the mark II version’s looks better and they may be right. But the mark III has a brighter viewfinder, which will be good for nighttime shooting.

Thar she blows:



So why did I get it when I already have a few other MF cameras? Well, for starters, it’s gonna be great to travel with. It shoots 6×9 with a star studded lens. Not the fastest lens at a max f3.5 but it’s useable (and better than the f5.6 of the 65mm wide version).

But the real reason I bought the camera? BURNING MAN.

Yep, ol’ Jeremiah is headed to Black Rock City in T-Minus 7 days. And boy, I am really excited. This is going to present a lot of great photo ops. But there is a danger… this beautiful specimen of a camera is headed to the dessert… a dirty alkaline dusty desert that is hot and full of wild people.

I was really torn about taking my newfound friend. But after buying some gaffers tape, I started thinking this could be doable. I need to seal her up right and hopefully* she’ll come back in one piece and with minimal dust. Let’s break down the problems here and see what we can do.


Gaffers Tape. Packing Tape, Painters Tape, Measuring Tape, Exacto Blade, Large bottle to cut tape upon, Pen, Coffee, Music, and a nice lady next to you.

photo 2


The bottle worked well. I would take the tape off the roll, apply it to the bottle and use the exact knife. We don’t have a good place to cut tape on and the glass is a very smooth/clean surface. The downside is that it is curved, so if you want to use a window or a bottle with flat surfaces, that may work better.


There are moving parts here so I can’t tape over them. The idea I came up with is a “seal” that simple sits over the moving parts and lets them move freely. Admittedly in the photo below, it’s tough to know what you’re looking at, but that’s the lens (completely covered in gaffers tape).

photo 4 (1)

What is that blue tape? Well, I had to tape over the focal numbers due to my seal, so I simply moved those to a blue piece of painters tape. I like zone focusing when needed so I thought this an apt solution.

Note: The least* sealed part of this camera will be the shutter speed/aperture assembly. There’s just no way I can do it with tape and still be able to change aperture/shutter speed. I will have to rely on just good practice to make sure I don’t get dust in here… Also of note is the front element of the lens. I have a good lens filter to keep her clean.

Here’s the folded over seal before applying:

photo 4


I need to seal off the rangefinder. I could cover it in clear packing tape, but that would leave a crappy residue when I take it off. So, I first put down a layer of gaffers tape and then a layer of packing tape. This obviously reduces/distorts the light coming through which sucks. But it’s still useable and I want this camera to go miles after BurningMan.

photo 3

Viewfinder Window

The eyepiece got some treatment as well. I could’ve covered this in packing tape as I did the front, but it just made the view too blurry and I think this will suffice.

photo 1


Winder Assembly

This is probably one of the more difficult interfaces to seal. I simply am going with more of the seals I showed above that I used for the lens assembly.
photo 2 (1)

The Rest of the Camera

I taped over a number of crevices that I thought could be points of entry. Also, I added a bit of tape to the door latch, to make the opening between the door and the body more “snug”. Anything I can do to keep dust out, is a precaution worth taking so I’m not sparing any expense or tape here.

The Finished Product

When I go, I will put some temporary tape over the selector between 220 and 120 film (I’ll be switching frequently between the two). I have 20 rolls of porta 160 220 just itching to be burned at Burning Man. If only they still made black and white in 220, then I’d be able to change rolls less frequently! Both color and Black and white will be fun. I think I’ll shoot the first half of the trip in color and then switch to BnW on the second half… Either way, I can’t wait to get burnin.

photo 5




One thought on “Burn-Proofing Your Camera

Talk to me!

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s